Home > Seal Repair Kits >

EX200-2 EX200-3 EX200-5 Excavator Center Joint Seal Kit 4390776

Product Categories

Excavator Hydraulic Cylinder Seal Kit [44]
Hydraulic Breaker Seal Kit [15]
Excavator Engine Parts [53]
Excavator Turbocharger [16]
Hydraulic Pump Parts [13]
Gearbox Spare Parts [28]
Excavator Bucket Teeth [13]
Control Valve Seal Kit [18]
Excavator Undercarriage Parts [16]
Seal Repair Kits [22]
Engine Overhaul Gasket Kit [13]
Engine Exhaust Muffler [20]

guangzhou zhengyingjiuhe machinery Co., Ltd

Contact Now

EX200-2 EX200-3 EX200-5 Excavator Center Joint Seal Kit 4390776

Ask Lasest Price
Brand Name :	TOT
Model Number :	EX200-5
Price :	Negotiable
Payment Terms :	T/T
Supply Ability :	3000 Piece/Pieces per Week
Delivery Time :	Within 3-7days after received payment

Add to Cart

Product Details
Company Profile

EX200-2 EX200-3 EX200-5 Excavator Center Joint Seal Kit 4390776

4390776 EX200-2 EX200-3 EX200-5 Excavator Center Joint Seals

When oil leakage is found, we should first check whether there is anything wrong with the oil sealing area.

1. Phenomenon: Leakage occurs at low pressure but it stops sometimes at high pressure

Cause: surface finish of fitting groove is poor. Frequent occurrences particularly in the integral grooved housing

Countermeasure: lmprove the surface roughness approximately to 3.2-6.3μm Rz. Change the material to a lower hardness rubber

2. Phenomenon: Oil ring on the rod becomes loose and drops with each stroke.

Cause: Oil film is scraped out by lip of the dust seal

Countermeasure: Replace by a dust seal with smaller oil scraping amount.

3. Phenomenon: Leakage occurs at low temperatures and stops at high temperatures

Cause: 1. Excessive eccentricity; 2. inadequate seal material

Countermeasure: Change material to low temperature resistant rubber.

Feature

1) Available material : material for NBR,silicone,VITON(FKM)&Dow elastomers,Neoprene,HNBR,Natural rubber,SBR,IR,IIR(butyl rubber),ACM ect.NSF an KTW approved for material EPDM.

2) All manufacturing processes confirm to the ISO/TS16949,SGS,ROHS,REACH

3) Customer's design and specifiions are accepted.

4) Color and shape can be changed upon request. Available in various sizes and colors.

5) Our professional R&D team can provide you higher quality products with competitive price and all documents such as PPAP, CONTROL PLAN, PFMEA etc.

6) Have advanced CNC machine and technique to cut bonding washer molds by ourself.

7) High and low temperature resistance, oil resistance, anti-ozone and aging, wearable,great flexibility etc

Packing

Inner: PP bag(many defferent sizes) or brand package.

Outer:Color box which full covered by yellow adhesive tape,closed,sturdy and you can find them easily.

Our outer box size - weight and practical usepractical use:

1) 35.5*29.5*28.5 mm - 0.5kg -for smaller size and heavier products;such as framework oil seal

2) 52.5*33*29 mm - 0.8kg - for bigger size and lighter products ; such as HBY

3) many other size for special situation

Product Tags:


*From:	Your email address is incorrect!
*To:	guangzhou zhengyingjiuhe machinery Co., Ltd
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!